|
|
Print-friendly version
Eliminizer
ELIMINIZER APPLICATION DRYER | | - Stop water, dirt to 1 micron
- Long life Spin on-Spin off cartridge
- Automatic drains
- Pressure differential indicators
- Applications to 500 psig
- Patented "Inverse-Flow™ and depth filtration
- Element features reusable stainless steel mesh
| Specifications
Type of contamination: Class 2 Particulate, Water and dirt
Flow ranges: 20 SCFM - 150 SCFM
Filter capacity: 1.0 micron and larger
Thread types available: NPT, BSPT, BSPP, SAE
Bowl types available: Aluminum, Polycarbonate
Differential Pressure < 5.0 PSID at Rated Flow |
|
A range of dryers/filters (up to 150 cfm) to provide clean, water free air. Using inverse flow filtration (patented) this is a point of use dryer/filter that fills the void between ordinary filters and refrigerated dryers.
All units fitted with automatic drain valve and are available with or without a differential pressure indicator to monitor condition of element.
Available with polycarbonate bowl with guard or with metal bowl.
Pressure: 10 bar (max)
Temperature: Polycarbonate bowl +50 deg C (Metal bowl +65 deg C)
Pressure drop: < 1psi (@100 psi and recommend flow rate)
Filtration: 1 micron
When selecting an Eliminizer dryer/fitler choose a unit where the flow required is approximately 50% of the maximum in the table below. |
| | | | | | | | | Optimum | Maximum | Connection | | 10cfm | 20cfm | 1/4" BSPP | | 17cfm | 35cfm | 1/4" BSPP | | 17cfm | 35cfm | 3/8" BSPP | | 17cfm | 35cfm | 1/2" BSPP | | 30cfm | 60cfm | 1/2" BSPP | | 45cfm | 90cfm | 3/4" BSPP | | 75cfm | 150cfm | 1" BSPP |
|
|
| You are viewing results 1 to 18 of 18 |
| You are viewing results 1 to 18 of 18 |
|
|
